Catchbox Hub DSP receiver with Dante® and network connectivity (2 or 4 mic channels)
Catchbox microphones (mix of Cube, Clip and Stick as needed)
Additional Dante®-enabled audio devices
Setup:
Connect the Hub DSP receiver to power and your Dante® network
On the Hub's screen, navigate to the IN section and pair each microphone, if not yet paired
Use Dante® Controller to route external audio sources to the Hub's Dante® inputs. In the Hub's interface, go to IN section -> Dante®, and enable required input channels
Set up audio mixing - in the Hub's interface go to OUT section -> Dante® and enable one Dante® output channel for mixed audio. Configure the mix to include both Catchbox mics and Dante® inputs
Route the mixed audio - in Dante® Controller send the Hub's mixed output to desired destinations on the network
Hub receiver automatically applies its DSP features including auto EQ, auto level, echo canceller, and feedback suppression to all Catchbox microphones
Benefits:
Integration of Catchbox mics with other audio devices
Centralized mixing of multiple audio sources within the Hub
Simplified audio routing with a single mixed output
Flexible input/output configurations to meet various use cases
Easy scalability by adding more Dante®-enabled devices to the network
Reduced risk of audio issues in complex setups through built-in DSP features such as echo cancellation and feedback suppression
