Scenario:
- Hub DSP receiver (2 or 4 mic channel connectivity)
- Catchbox microphones (mix of Cube, Clip and Stick as needed)
- External DSP system
Setup:
- Connect the Hub DSP receiver to power
- On the Hub's screen, navigate to the IN section and pair each microphone, if not yet paired
- Configure the external DSP to receive and process the audio from the Hub.
For unmixed audio integration:
Connect the Hub's unmixed 3-pin outputs to the external DSP inputs. In the Hub's interface, go to OUT section -> Direct, and ensure each microphone is assigned to its corresponding output.
For mixed audio integration:
Connect the Hub's mixed 3-pin output to a single input on the external DSP. In the Hub's interface, go to the OUT section -> Mixout -> 3-pin, and adjust the voice lift level as needed.
Hub's DSP features (automixer, echo canceller, feedback suppression) are automatically applied to the mixed output.
Benefits:
- Integration of Catchbox Plus system with existing audio infrastructure
- Combination of Hub's wireless capabilities with external DSP's advanced features
- Scalability for large or complex audio setups
Unmixed audio integration:
- Full control over each individual microphone channel
- Ability to apply custom processing to each microphone channel separately
- Flexibility for complex routing scenarios
Mixed audio integration:
- Simplified setup with a single audio stream
- Easy adjustment of overall voice lift level from the Hub
- Automatic application of Hub's built-in DSP features, complementing external DSP processing