Plus System Compatibility Guide

 

Use this guide to find the HAS number on your Cube, Clip, Stick mics, and the Hub receiver. The HAS number helps you identify the model of your Plus system and check compatibility between different Plus system devices.

There's a HAS number label on each of the Hub receivers and Plus system mics.
It looks like this: HAS-xxxxx. 

Use the tables below to look up your HAS number and confirm which other devices it's compatible with. 

To see exactly where the HAS number is located on each mic and receiver, check the pictures further down. 

HAS Number Compatibility Tables
Cube mic
Clip mic
Stick mic
Hub receiver 

HAS Number Compatibility Tables

 

Cube mic

Twist and pull the Cube capsule out of the soft cover. The label is located on the bottom of the capsule. Here's a video showing how to remove the Cube mic capsule. 

 

Clip mic

Remove the Clip jacket to find HAS number label.  Watch the video to see how to remove the mic jacket.

 

 

Stick mic

The HAS number for the Stick mic is located on the Stick adapter. To see the label, remove the Clip mic module from the adapter. The HAS number is underneath, on the adapter. Watch the video to see how to take out the Clip properly.

 

 

Hub receiver

Turn the Hub receiver around and look for the product model number on the upper left side. The white sticker with  HAS number is on the back as well, on the lower right side.