Custom branding the mics means you have complete control over how your mics look. Instead of picking from 4 standard colors, you get to choose the exact background color and logos or graphics to place on each mic.
Here's a step-by-step guide on how to customize your microphones:
➡️ Step 1: Open the Customization Window
➡️ Step 2: Set Custom Background Color
➡️ Step 3: Uploading and Formatting Logos
➡️ Step 4: Download or Share Design
Step 1
Open the Customization Window
To begin designing, look at your microphone list on the right side of the screen and click Edit Style next to the mic you want to work on. This opens a design pop-up window where you can change the background color and manage your logos.
Step 2
Set Custom Background Colour
You can pick a custom background color in two ways:
-
by using the visual color picker tool
-
by typing specific Hex or RGB color codes directly into the input boxes
💡Time-Saving Tip: If you want all microphones in your bundle to share the exact same custom background color, click the Apply color to all mics below the color input boxes.
Step 3
Uploading and Formatting Logos
Each microphone type handles logos slightly differently.
Cube Mic
You can customize each of the four Cube sides separately when it comes to logos.
Choose to keep the standard Catchbox logo, remove it completely, or upload an image file of your own.
The background color remains consistent across all four sides.
Stick Mic
Stick has a two-sided upper jacket and you don't need to upload the logo twice. When logo is added to the front face, the system automatically mirrors it to the opposite side and updates your visual preview.
Important Rules for Clip and Stick Jackets
-
The printable area on Clip and Stick jackets is much smaller compared to the Cube therefore highly detailed graphics or logos with small text will not print well on these surfaces. For both Clip and Stick jackets, we recommend using bold logos and visuals that don't have a lot of small details.
-
At least one side of your image must be 700px or larger and the file size must not exceed 5MB limit. If your file happens to fall outside these requirements, the system will show you a popup window indicating if your image is too small or too large.
-
Once an image is uploaded, it is saved to your library panel on the right, making it easy to apply it to other microphones without re-uploading.
Step 4
Download or Share Design
You don't have to complete the purchase just to share the custom design with someone.
Click the Share button on the main panel and:
-
Download design PDF file
-
Save a unique link to your exact configuration so you can access the design draft at any time or continue editing on any device
➡️ Next step: Choosing chargers