How to connect Catchbox to a laptop (Windows)
In this article:
Catchbox Lite setup with Windows
- 1
-
Connect the receiver:
- Connect the power supply to the receiver and plug the cord into an AC power source.
- Plug the included USB audio adapter to the computer's USB port and connect it to the receiver's audio output using the provided audio cable.
- 2
- Remove the transmitter from the cover - twist the cylinder 90 degrees to release the magnetic lock and pull it upwards.
- 3
- Turn on both the transmitter and the receiver - the status LED should turn green on both.
- 4
- Adjust settings on your computer - go to Control Panel --> Sound --> Recording, and select "Catchbox".
- 5
- Adjust the volume level - test it first by speaking into the microphone and adjust it using the volume knob on the receiver and/or volume buttons on the transmitter.
- 6
- Place the transmitter into the cover - make sure to secure the magnetic lock between both! Do this by aligning both black triangle marks on the cover and transmitter. You should hear a slight click when the magnets lock.
- 1
- Connect the receiver - plug the included USB data cable to the computer’s USB port and connect it to the receiver’s micro-USB socket.
- 2
- Adjust settings on your computer - go to Control Panel --> Sound --> Recording, and select “Catchbox”.
- 3
- Remove the transmitter from the cover - twist the cylinder 90 degrees to release the magnetic lock and pull it upwards.
- 4
- Turn on the transmitter and receiver - the status LED should turn green on both.
- 5
- Pair the transmitter and receiver - no pairing is necessary as Catchbox Plus is already paired with its receiver in our facility.
- 6
- Adjust the volume level - test it first by speaking into the microphone and adjust it using the volume knob on the receiver and/or transmitter.
- 7
- Place the transmitter into the cover - make sure to secure the magnetic lock between both! Do this by aligning both black triangle marks on the cover and transmitter. You should hear a slight click when the magnets lock.
Catchbox Plus setup with Windows
If pairing the transmitter and receiver is necessary, press the pairing button on the back of the receiver and press both volume control buttons simultaneously on the transmitter. If you can see solid LED lights on the transmitter and receiver, the pairing was successful.